Rear

Stabilizer Shaft Link Replacement (Pickup and 4-Door Utility)
Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the stabilizer shaft link upper nut and bolt.





3. Remove the stabilizer shaft link lower nut and bolt.
4. Remove the stabilizer shaft link

Installation Procedure





1. Install the stabilizer shaft.
2. Install the stabilizer shaft link lower mounting bolt.





3. Install the stabilizer shaft link upper mounting bolt.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the stabilizer shaft link mounting nuts.
Tighten
- Tighten the stabilizer shaft link lower mounting nut to 57 Nm (42 ft. lbs.).
- Tighten the stabilizer shaft link upper mounting nut to 35 Nm (25 ft. lbs.).
5. Lower the vehicle.