Air Cleaner Outlet Resonator Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove the air cleaner outlet retaining nut (1).
4. Remove the air cleaner outlet duct (2) from the throttle body assembly.




5. Loosen the air cleaner outlet duct from the MAF/IAT sensor.
6. Remove the air cleaner outlet duct.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the air cleaner outlet duct to the MAF/IAT sensor.

Tighten
Tighten the clamp to 4 N.m (35 lb in).




2. Install the air cleaner outlet duct (2) on the throttle body assembly.
3. Tighten the retaining nut (1).

Tighten
Tighten the nut 2 N.m (18 lb in).

4. Install the engine cover.
5. Connect the negative battery cable.