SECURITY Indicator Inoperative

CIRCUIT DESCRIPTION
The Security Indicator Inoperative check is designed to find out the reason the Security indicator is not illuminating. However, the Theft Deterrent System Diagnostic System Check must always be the starting point for all PASSLOCK(TM) system troubleshooting.

The diagnostics in this table are designed to troubleshoot non DTC troubles. For example battery power, ignition 1 input, ground, and shorted or open SECURITY indicator circuit.

DIAGNOSTIC AIDS
Perform a visual inspection of the wiring and the connectors. Refer to Testing for Intermittent and Poor Connections in Diagrams.

TEST

Steps 1-7:

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes