Jack and Tool Stowage Container Tray Replacement

Jack and Tool Stowage Container Tray Replacement

Removal Procedure

1. Remove the jack and tool stowage container. Refer toJack and Tool Stowage Replacement (Jack and Tool Stowage Replacement) .




2. Remove the nuts (3) that retain the tray to the vehicle floor.
3. Remove the bolts (1) that attach to the jack stowage bracket to the vehicle.
4. Remove the bracket (2) from the vehicle.



Installation Procedure





1. Install the bracket (2) into the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolt (1) that attaches to the bracket.

Tighten the bolt to 8 N.m (71 lb in).

3. Install the nuts (3) that retain the tray to the vehicle floor.

Tighten the nuts that retain the jack and tool container stowage tray to the vehicle to 28 N.m (21 lb ft).

4. Install the jack and tool stowage container. Refer to Jack and Tool Stowage Replacement (Jack and Tool Stowage Replacement) .