Jack and Tool Stowage Replacement

Jack and Tool Stowage Replacement

Removal Procedure





1. Remove the nut (5) that retains the jack and tool container.
2. Remove the retainer (4) from the jack.
3. Remove the tool container (2) from the bracket.
4. Remove the jack (1) from the bracket.



Installation Procedure





1. Install the jack (1) to the bracket.
2. Install the tool container (2) to the bracket.
3. Install the retainer (4) to the jack.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the nut (5) that retains the jack and tool container.

Tighten the nut to 5 N.m (44 lb in).