Radiator: Service and Repair

Removal Procedure





1. Drain the coolant.
2. Remove the radiator inlet hose from the radiator.
3. Remove the fan shroud.





4. Remove the radiator outlet hose from the radiator.
5. Disconnect the transmission oil cooler lines from the radiator.
6. Disconnect the engine oil cooler lines from the radiator.
7. Disconnect the following hoses if applicable:
^ Surge tank hose
^ Coolant recovery hose
^ Heater outlet hose





8. Remove the radiator from the vehicle.

Installation Procedure

Notice: Refer to Coolant Addition Notice in Service Precautions.





1. Install the radiator to the vehicle. Ensure the lower insulators are properly installed.
2. Connect the following hoses if applicable:
^ Surge tank hose
^ Coolant Recovery hose
^ Heater Outlet hose
3. Install the engine oil cooler lines to the vehicle.
4. Install the transmission oil cooler lines.





5. Install the radiator outlet hose to the radiator.
6. Install the fan shroud to the vehicle.





7. Install the radiator inlet hose to the radiator.
8. Refill the coolant.