Seat Replacement - Bucket (Luxury RPO Y91)

SEAT REPLACEMENT - BUCKET


REMOVAL PROCEDURE




1. Remove the nuts that retain the seat riser to the floor.
2. Disconnect the electrical connector.
3. Remove the seat and the riser from the vehicle.




4. Remove the front lower speaker from the passenger seat, if needed.
5. Remove the bolts that retain the seat to the riser.
6. Remove the power seat from the seat risers if equipped.

INSTALLATION PROCEDURE




1. install the power seat to the seat risers if equipped.
2. Install the seat belt guide to the seat riser.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the nuts that retain the seat to the risers.

Tighten
Tighten the nuts that retain the seat to the riser to 43 Nm (32 lb ft).

4. Install the front lower speaker to the passenger seat, if needed.
5. Install the seat and the seat riser to the vehicle.
6. Connect the electrical connector.




7. Install the nuts that retain the seat riser to the floor.

Tighten
Tighten the nuts that retain the seat riser to the floor to 43 Nm (32 lb ft).

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes