Scan Tool Data Definitions

AMPLIFIER: The scan tool displays Present/Not Present. The Amplifier data parameter refers to the Class 2 message that the remote amplifier is or is not present.

AMPLIFIER TYPE: The scan tool displays Bose/Non-Bose. The Amp Type data parameter refers to the Class 2 message that identifies the remote amplifier as a Bose or Non-Bose amplifier.

ANTENNA POWER: The scan tool displays On/Off. The Antenna Power parameter displays On or Off when Antenna Power is present/not present respectively.

BALANCE: The scan tool displays % (percent). The Balance data parameter refers to the right to left audio output balance (in percent).

BASS: The scan tool displays % (percent). The Bass data parameter refers to the percentage of bass commanded by the radio control head.

CASSETTE INSERTED: The scan tool displays Yes/No. The Cassette Inserted data parameter refers to the presence of a cassette tape in the cassette player.

CASSETTE METAL: The scan tool displays Metal/Not Metal. The Cassette Metal data parameter refers to the whether or not the inserted cassette tape is of metallic composition.

CASSETTE SIDE: The scan tool displays Top/Bottom. This data parameter indicates the side of the installed cassette that is currently being read by the tape player.

CD CHANGER: The scan tool displays Connected/Not Connected. The module displays Connected when the CD sense wire has been grounded to signal that a remote CD changer is present.

CD INSERTED: The scan tool displays Yes/No. This data parameter indicates whether the CD player recognizes an inserted disc.

CHIME: The scan tool displays On/Off. This data parameter indicates the commanded state of operation of the chime function.

FADE: The scan tool displays % (percent). This data parameter refers to the front to back audio output Fade (in percent).

FAN CONTROL: The scan tool displays On/Off. This data parameter indicates the commanded state of the radio cooling fan.

IGNITION SINCE CURRENT DTC: The scan tool displays Cycles. This data parameter indicates the number of ignition cycles since a current DTC was set.

PHONE: The scan tool displays Present/Not Present. This data parameter indicates if the radio detects the presence of a cellular telephone.

SOURCE: The scan tool displays Off/Tuner/CD/Cassette This data parameter indicates the source that is operating.

THEFT ARMED: The scan tool displays VIN/No VIN. The scan tool displays VIN when the theft mode has been turned ON by recognizing a valid VIN.

THEFT LOCK: The scan tool displays Locked/Unlocked. The scan tool displays Locked when the radio receives the incorrect VIN number from the PCM across Class 2 lines.

TREBLE: The scan tool displays % (percent). This data parameter indicates the amount of treble (in percent) selected at the radio.

VOLUME: The scan tool displays % (percent). This data parameter indicates the amount of volume (in percent) selected at the radio.