Headlamp Leveling (Export)

This feature provides a method or leveling the headlamp beams. The headlamp leveling switch provides 4 headlamp leveling positions. The switch controls headlamp leveling actuators which are mounted under each headlamp assembly.

The headlamp leveling switch is a variable resistor which changes voltage on the headlamp leveling motor supply voltage circuit. A processor inside each actuator interprets the voltage signal, and the processor commands the actuator motors to adjust the headlamp position.

The GAUGES 10 A fuse in the IP fuse block supplies voltage to the motors and the switch. The motors and switch are grounded at G201.