| Wheel Alignment Specifications | Caster | Service Allowable | 3.75 +/-1.0 Degrees (deg) |
| | Service Preferred | 3.75 Degrees (deg) |
| Camber | Service Allowable | 0.50 +/- 0.50 Degrees (deg) |
| | Service Preferred | 0.50 Degrees (deg) |
| Toe | Service Allowable | 0.24 +/- 0.20 Degrees (deg) |
| | Service Preferred | 0.24 Degrees (deg) |
| Trim Height Specifications (Front) | All Vehicles | Service Checking | 3.74 Inch (in) |
| | Service Setting | 3.74 +/- 0.236 Inch (in) |
| | Side to Side Tolerance | 0.5 Inch (in) |
| Trim Height Specifications ( Front) | With Auxiliary Springs | Service Checking | 5.25 +/- 0.5 Inch (in) |
| | Service Setting | 5.25 +/- o.5 Inch (in) |
| | Side to Side Tolerance | 0.5 Inch (in) |
| Without Auxiliary Springs | Service Checking | 4.25 +/-0.5 Inch (in) |
| | Service Setting | 4.25 +/- 0.5 Inch (in) |
| | Side to Side Tolerance | 0.5 Inch (in) |
| Trim Height Specifications (Rear) | With Auxiliary Springs | Service Checking | 5.25 +/-0.5 Inch (in) |
| | Service Setting | 5.25 +/-0.5 Inch (in) |
| | Side to Side Tolerance | 0.5 Inch (in) |
| Without Auxiliary Springs | Service Checking | 4.25 +/-0.5 Inch (in) |
| | Service Setting | 4.25 +/-0.5 Inch (in) |
| | Side to Side Tolerance | 0.5 Inch (in) |