Power Mirror Replacement

Power Mirror Replacement

Removal Procedure





1. Remove the front door garnish molding. Refer to Front Side Door Front Garnish Molding Replacement () .
2. Remove the front door trim panel. Refer to Door Trim Panel Replacement (Service and Repair) .
3. Remove the electrical connector from the rearview mirror.
4. Remove the nuts that retain the power rearview mirror to the door.
5. Remove the power rearview mirror and the harness from the door.



Installation Procedure





1. Install the power rearview mirror and the harness to the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts in order to retain the power rearview mirror to the door.

Tighten the retaining nuts to 10 N.m (89 lb in).

3. Install the electrical connector to the power rearview mirror.
4. Install the front door trim panel. Refer to Door Trim Panel Replacement (Service and Repair) .
5. Install the front door front garnish molding. Refer to Front Side Door Front Garnish Molding Replacement () .