Fog Lamp Replacement - Front (Luxury Y91)

REMOVAL PROCEDURE




1. Disconnect the electrical connector from the front fog lamp.
2. Remove the push pin retainers (1) that attach the fog lamp to the mounting bracket (3).
3. Remove the fog lamp adjuster bolt and the spring (4) from the adjuster nut.
4. Remove the fog lamp from the fog lamp mounting bracket.

CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

5. Use a drill, and the appropriate drill bit in order to remove the fog-lamp bracket rivets (2), if needed.
6. If necessary, remove the fog lamp mounting bracket.

INSTALLATION PROCEDURE




1. If you removed the fog lamp mounting bracket, install the bracket.
2. If you removed the fog lamp mounting bracket, install the rivets (2).
3. Install the fog lamp to the fog lamp mounting bracket.
4. Install the fog tamp adjuster bolt and the spring (4) to the adjuster nut.
5. Install the push pin retainers (1) that attach the fog lamp to the mounting bracket (3).
6. Connect the electrical connector to the front fog lamp.
7. Verify that the fog lamp meet the aiming specifications. Refer to Fog Lamp Aiming Procedure (Luxury Y91).

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes