Park Brake Hardware Replacement
Park Brake Hardware ReplacementRemoval Procedure
1. Install the pin into the park brake pedal.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Remove the brake drum.
5. Remove the drum brake shoes and hardware.
6. Remove the park brake hardware.
Installation Procedure
Important: Apply a high temperature silicone brake lubricant to all of the brake component metal contact points (where the brake shoe metal contacts the backing plate, the wheel cylinder and the adjustment strut, etc.) prior to installation.
1. Replace the park brake hardware components as necessary.
2. Install the drum brake shoes and hardware.
3. Install the drum.
4. Install the tire and wheel assembly.
5. Remove the pin from the park brake pedal.
6. Adjust the park brake.
7. Lower the vehicle.