Driver or Passenger Seat Lumbar Support Replacement (Manual)

Driver or Passenger Seat Lumbar Support Replacement (Manual)

Removal Procedure

1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
2. Remove the head restraint and guides. Refer to Head Restraint Replacement (Head Restraint Replacement).
3. Remove the seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).




4. Detach the lumbar clip from the top of the seat back frame.
5. Rotate the top of the lumbar mechanism forward in order to unclip the lumbar mechanism from the bottom of the seat back frame.




6. Disconnect the lumbar cable (6) from the lumbar actuator (5).
7. Remove the lumbar assembly from the vehicle.

Installation Procedure

1. Position the lumbar assembly to the seat.




2. Connect the lumbar cable (6) to the lumbar actuator (5).
3. Rotate the top of the lumbar mechanism in order to clip the lumbar mechanism onto the bottom of the seat back frame.




4. Attach the lumbar clip onto the top of the seat frame.
5. Install the seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).
6. Install the head restraint and guides. Refer to Head Restraint Replacement (Head Restraint Replacement).
7. Install the front seat in the vehicle. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).