Starter Motor Replacement -2

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.




3. Remove the starter motor bolts.




4. Remove the starter lead nut (9).
5. Remove the positive cable (1) from the starter.




6. Remove the starter solenoid nut.
7. Remove the harness from the starter.
8. Remove the starter from the vehicle.

INSTALLATION PROCEDURE




1. Install the starter to the vehicle.
2. Install the harness to the starter.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the starter solenoid nut.

Tighten
Tighten the starter solenoid nut to 3.4 N.m (30 lb in).




4. Install the positive cable (1) to the starter.
5. Install the starter lead nut (9).

Tighten
Tighten the starter lead nut to 9 N.m (80 lb in).




6. Install the starter motor bolts.

Tighten
Tighten the starter motor bolts to 43 N.m (32 lb ft).

7. Lower the vehicle.




8. Connect the negative battery cable.