Park Brake Shoe Inspection

Park Brake Shoe Inspection

Caution: Refer to Brake Dust Caution in Service Precautions.

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the rear brake caliper bracket with the rear brake caliper.
4. Remove the rear brake rotor.
5. Inspect and replace the park brake shoe and lining if any of the following conditions are found:
^ Excessive wear indicated by the park brake lining being worn down to the shoe
^ Brake lining cracking
^ Oil or fluid contamination of the brake lining
6. Adjust the park brake shoe.
7. Install the rear brake rotor.
8. Install the rear brake caliper with the rear brake caliper bracket.
10. Lower the vehicle.