Ash Tray: Service and Repair

Ashtray Replacement

Removal Procedure




1. Remove the ashtray from the instrument panel (I/P) by depressing the tab and sliding the ashtray rearward.




2. Remove the lower I/P trim panel. Refer to Instrument Panel Lower Trim Panel Replacement (Instrument Panel (IP) - Trim Panel Replacement - Lower).




3. Remove the ashtray lamp wiring harness from the ashtray housing.




4. Remove the screws holding the ashtray housing to the rear of the I/P lower trim panel.
5. Remove the ashtray housing from the lower trim housing.

Installation Procedure

1. Install the ashtray housing to the lower I/P trim panel.





Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

2. Install the screws holding the ashtray housing to the rear of the I/P lower trim panel.

Tighten the ashtray housing screws to 2 Nm (18 lb in).




3. Connect the ashtray lamp wiring harness to the ashtray housing.




4. Install the lower I/P trim panel. Refer to Instrument Panel Lower Trim Panel Replacement (Instrument Panel (IP) - Trim Panel Replacement - Lower).




5. Insert the ashtray to the I/P by depressing the tab and sliding the ashtray forward.