Console Storage Bin Replacement (Non-Luxury)

REMOVAL PROCEDURE




1. Open the center console.
2. Remove the console storage bin screws.
3. Remove the 4 bolts retaining the console to the bracket.
4. Remove the rear cupholder by using a flat bladed tool to pry on one side out, if equipped.
5. Remove the 2 retaining screws.
6. Remove the console storage bin and lid assembly from the console.

INSTALLATION PROCEDURE




1. Install the console storage bin and lid assembly to the console.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the 2 retaining bin screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the rear cupholder by pushing the unit in until the cupholder locks into place.
4. Install the 4 bolts retaining the console to the bracket.

Tighten
Tighten the bolts to 2 N.m (18 lb in).

5. Install the bin screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

6. Close the console.