Door Replacement - Console Compartment

REMOVAL PROCEDURE




1. Remove the console storage bin, if equipped.
2. Remove the hinge cover, if equipped.
3. Remove the console door screws (1).
4. Remove the console door assembly.

INSTALLATION PROCEDURE




1. Install the console door assembly to the hinge.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the console door assembly screws (1).

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

3. Install the hinge cover, if equipped.
4. Install the console storage bin, if equipped.