Hinge Replacement - End Gate
HINGE REPLACEMENT - END GATEREMOVAL PROCEDURE
1. Remove the endgate.
2. Remove the endgate hinge bolts.
3. Remove the hinge.
4. Remove the body side hinge bolts.
5. Remove the hinge from the vehicle.
INSTALLATION PROCEDURE
1. Install the body side hinge to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the body side hinge bolts.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
3. Install the endgate hinge to the vehicle.
4. Install the endgate hinge bolts.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
5. Install the endgate.