Air Temperature Door Replacement

REMOVAL PROCEDURE




1. Remove the HVAC module. Refer to Heater/Vent Module Replacement.
2. Remove the HVAC module screws.
3. Separate the HVAC module halves.
4. Remove the air temperature door (8).

INSTALLATION PROCEDURE




1. Install the air temperature door (8).
2. Assemble the HVAC module halves.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the HVAC module screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

4. Install the HVAC module. Refer to Heater/Vent Module Replacement.