Seat Switch Replacement - Power

REMOVAL PROCEDURE




1. Remove the lumbar knob, if equipped.
2. Remove the power seat switch bezel from the seat.




3. Remove the power seat switch to bezel screws.
4. Remove the power seat switch.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the power seat switch to bezel screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).




2. Install the power seat switch bezel to the seat.
3. Install the lumbar knob, if equipped.