Steering Column Trim Covers - Disassemble - Snap On Shrouds

Steering Column Trim Covers - Disassemble - Off Vehicle (Column Shift Snap On Shrouds)

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the inflatable restraint steering wheel module.
2. Remove the steering wheel from the column.
3. Remove the tilt lever from the lower trim cover.

Important: You must check for 2 pan head tapping screws (1,2) in the lower trim cover before removal.

4. If necessary, remove the 2 pan head tapping screws (1,2) from the lower trim cover (3). Remove the lower trim cover (3).
If screws are not present in the lower trim cover, proceed to the next step.





5. Gently unsnap the lower trim cover from the upper trim cover.

Important: You must check for 2 pan head tapping screws (1,2) in the lower trim cover (3) before removal.





6. If necessary, remove 1 TORX (R) head screw (1) from the upper trim cover (2).
If a screw is not present, remove the upper trim cover (2).