Console Replacement (Pro)

Console Replacement (Pro)

Removal Procedure

1. Remove the cupholder assembly. Refer to Cupholder Replacement (Except Pro) (Cupholder Replacement - Except Pro)Cupholder Replacement (Pro) (Cupholder Replacement - Pro).
2. Remove the console lid and bin assembly. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).




3. Remove the 6 console retaining bolts (1).
4. Lift up the console slightly in order to disconnect the wire connectors.
5. Remove the console from the bracket.

Installation Procedure

1. Place the console on the bracket.
2. Connect all the wire connectors.





Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

3. Install the 6 console retaining bolts (1) to the I/P extension.

Tighten the 6 retaining bolts to 1.6 Nm (14 lb in).

4. Install the console lid and bin assembly. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).
5. Install the cupholder assembly. Refer to Cupholder Replacement (Except Pro) (Cupholder Replacement - Except Pro)Cupholder Replacement (Pro) (Cupholder Replacement - Pro).