Too Hot In Vehicle

TEST DESCRIPTION

Steps 1-6:

Steps 7-14:

Steps 15-25:

The numbers below refer to the step numbers on the diagnostic table.
2. The DTCs listed may set, if there is a concern with the actuator, when a calibration of the actuators is performed.
3. Ambient air temperature must be above 3°C (38°F) in order for this A/C compressor test to be run.
4. Misaligned air baffles will cause poor A/C performance at idle and low speed operation.
6. The specified values are from the A/C System Performance Test.
8. This action ensures that the internal fan of the inside air temperature sensor assembly is providing air flow across the internal sensor.