Front

Spring Bumper Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Unsnap the jounce bumper from the mounting cup (4WD 15 Series and RWD 25 Series).





3. Remove the nut from the jounce bumper stud (4WD 25 Series and RWD 15 Series).
4. Remove the jounce bumper.

Installation Procedure





1. Snap the jounce bumper to the mounting cup (4WD 15 Series and RWD 25 Series).
2. Install the jounce bumper (4WD 25 Series and RWD 15 Series).

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the nut to the jounce bumper stud.
Tighten the nut to 30 Nm (22 ft. lbs.).
4. Remove the safety stands.
5. Lower the vehicle.