Rear Wheel Steering Mode Switch Replacement
Rear Wheel Steering Mode switch ReplacementRemoval Procedure
1. Remove the dash trim bezel.
2. Grasp the rear wheel steering mode switch housing (2) and pull outward to remove the switch assembly.
3. Disconnect the electrical connector (3) from the rear wheel steering mode switch .
4. Remove the rear wheel steering mode switch assembly (1) from the vehicle
Installation Procedure
1. Reconnect the rear wheel steering mode switch (3) electrical connectors.
2. Install the rear wheel steering mode switch (1) into the dash.
3. Reinstall the dash trim bezel.