Steering Wheel Control Switch

Steering Wheel Control Switch Assembly Replacement

Removal Procedure





1. Remove the steering wheel.
2. Remove the horn switch from the steering wheel.





3. Remove the steering wheel shroud retaining screws from the back of the steering wheel.
4. Remove the steering wheel shroud from the steering wheel.





5. Remove the steering wheel control switch mounting screws.





6. Disconnect the steering wheel control switch (2) electrical connector (1).





7. Remove the steering wheel control switch from the steering wheel.

Installation Procedure





1. Install the steering wheel control switch to the steering wheel.

NOTE: Refer to Fastener Notice in Service Precautions.





2. Install the steering wheel control switch mounting screws.
- Tighten the mounting screws to 2 Nm (20 inch lbs.).





3. Connect the electrical connector (1) to the steering wheel control switch.





4. Install the horn switch to the steering wheel.
- Tighten the steering wheel horn switch to 5.5 Nm (50 inch lbs.).
5. Install the steering wheel.