Antenna: Service and Repair
FIXED ANTENNA REPLACEMENTREMOVAL PROCEDURE
1. Disconnect the antenna mast (1).
2. Remove the nut (2).
3. Remove the bezel (3).
4. Disconnect the antenna cable from the extension cable (6).
5. Remove the screw (5).
6. Disconnect the cable assembly.
INSTALLATION PROCEDURE
1. Connect the antenna cable assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screw (5).
Tighten
Tighten the screw to 5 N.m (58 lb in).
3. Connect the antenna cable to the extension cable (6).
4. Install the bezel (3).
5. Install the nut (2).
Tighten
Tighten the nut to 5 N.m (58 lb in).
6. Install the antenna mast (1).