Rearview Mirror Replacement

Rearview Mirror Replacement

Removal Procedure




1. Disconnect the electrical connectors (1).
2. Remove the electrical wire cover (3).




3. Remove the screw (3) from the base.
4. Slide mirror off of the support (1).

Installation Procedure




1. Slide the mirror on to the mirror support (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screw (3) to the base.

Tighten the screws to 2 N.m (18 lb in).




3. Install the wire cover (3).
4. Connect the electrical connectors (1).