Vehicle Speed Sensor (VSS) Module Replacement

REMOVAL PROCEDURE




1. Remove the storage compartment.
2. Pull the retaining tabs (1) toward the back of the vehicle in order to release the vehicle speed sensor (VSS) module (2).
3. Remove the VSS module (2) from the instrument panel carrier.
4. Disconnect the electrical connector (3) from the VSS module (2).
5. Remove the VSS module (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the vehicle speed sensor (VSS) module (2) to the vehicle.
2. Connect the electrical connector (3) to the VSS module (2).
3. Position the VSS module (2) to the instrument panel carrier retaining tabs (1).
4. Install the storage compartment.