Keyless Entry Interior Illumination

When the driver uses the door key in order to unlock the doors, the keyless entry module receives a door unlock signal. The keyless entry module must have inputs that indicate that the ignition switch is OFF, the courtesy lamp switch is OFF and all the doors are closed. The keyless entry module will then activate the interior lamps. The courtesy lamps will remain on, approximately 10 seconds after the door is closed. The keyless entry module will then turn them off. If the door locks are activated to the

LOCK position, or if the ignition switch is turned to either the RUN or CRANK position the courtesy lamps will turn off immediately.

When the driver uses the remote function actuator transmitter to unlock the doors, the keyless entry module will keep the courtesy lamps on approximately 10 seconds. If the door locks are activated to the UNLOCK or LOCK position, or if the ignition switch is turned to either the RUN or CRANK position the courtesy lamps will turn off immediately.