Front Suspension
| Axle Shaft Nut | 155 ft. lbs. |
| Brake Hose Bracket Bolt | 80 inch lbs. |
| Brake Hose Clip Bolts | 106 inch lbs. |
| Frame Cross Bar | 74 ft. lbs. |
| Hub and Bearing Assembly to teering Knuckle Bolts | 133 ft. lbs. |
| Jounce Bumper Stud Nut | 22 ft. lbs. |
| Lower Ball Joint to Lower Control Arm Nuts | 52 ft. lbs. |
| Lower Ball Joint Stud Nut | 74 ft. lbs. |
| Lower Control Arm to Frame Nuts | 110 ft. lbs. |
| Outer Tie Rod Jam Nut | 50 ft. lbs. |
| Shock Absorber Tension Nut | 15 ft. lbs. |
| Shock Absorber to Control Arm Bolts-2WD | 19 ft. lbs. |
| Shock Absorber to Lower Control Arm Nut | 59 ft. lbs. |
| Stabilizer Shaft Insulator Clamp Bolts-15 Series | 24 ft. lbs. |
| Stabilizer Shaft Insulator Clamp Bolts-25/35 Series | 39 ft. lbs. |
| Stabilizer Shaft Link Nuts | 89 inch lbs. Continue tightening the nut until 2-4 threads protrude above the nut. The content of this article reflects the changes identified in TSB 05-03-08-006. |
| Torsion Bar Bushing Bracket Replacement Nuts | 30 ft. lbs. |
| Torsion Bar Support Mounting Nuts-15 Series | 70 ft. lbs. |
| Torsion Bar Support Mounting Nuts-25/35 Series | 70 ft. lbs. |
| Upper Bail Joint Stud Nut | 37 ft. lbs. |
| Upper Control Arm to Frame Nuts | 140 ft. lbs. |