Operation CHARM: Car repair manuals for everyone.

Center Console End Panel Replacement




Center Console End Panel Replacement

Removal Procedure

1. Open the center console lid and remove the storage bin. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).
2. Remove the rear cupholder from the end panel. Refer to Front Floor Console Cup Holder Replacement (Cupholder Replacement - Front Floor Console).




3. Remove the 4 retaining screws (1).




4. Remove the top 2 retaining screws (1).
5. Move the end panel rearwards to gain access to the electrical connectors.
6. Remove the end panel from the console.
7. Remove the rear seat heater switch, if equipped. Refer to Rear Seat Heater Switch Replacement (Rear Seat Heater Switch Replacement) in Seats.
8. Remove the rear seat audio controls, if equipped. Refer to Rear Seat Audio Control Replacement in Entertainment.
9. Remove the console floor lamp, if equipped. Refer to Console Lamp Replacement in Lighting Systems.
10. Remove the power outlets from the end panel, if equipped.

Installation Procedure

1. Install the power outlets to the end panel, if equipped.
2. Install the console floor lamp, if equipped. Refer to Console Lamp Replacement in Lighting Systems.
3. Install the rear seat audio controls, if equipped. Refer to Rear Seat Audio Control Replacement in Entertainment.
4. Install the rear seat heater switch, if equipped. Refer to Rear Seat Heater Switch Replacement (Rear Seat Heater Switch Replacement) in Seats.
5. Connect all electrical connectors.
6. Install the end panel to the console.





Notice: Refer to Fastener Notice in Cautions and Notices.

7. Install the 2 top retaining screws (1).

Tighten the screws to 1.6 Nm (14 lb in).




8. Install the 4 retaining screws (1).

Tighten the screws to 1.6 Nm (14 lb in).

9. Install the rear cupholder to the end panel. Refer to Front Floor Console Cup Holder Replacement (Cupholder Replacement - Front Floor Console).
10. Install the storage bin. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).