Front Door Window Glass: Service and Repair

Front Side Door Window Replacement

Removal Procedure




1. Raise the window partially up.
2. Remove the trim panel upper extension. Refer to Upper Extension Trim Panel Replacement (Upper Extension Trim Panel Replacement).
3. Remove the manual door lock lever.
4. Remove the manual window handle, if equipped. Refer to Door Window Regulator Handle Replacement (Service and Repair).
5. Remove the power accessory switch panel, if equipped. Refer to Power Accessory Switch Panel Replacement (Power Accessory Switch Panel Replacement).
6. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.
7. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
8. Remove the window run channel front bolt attachment.

Important: Do not remove the bolts.


9. Loosen the 2 retaining bolts (2) from the window assembly.
10. Remove the window (3) from the door by sliding the window out through the top.

Installation Procedure




1. Install the window (3) to the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Tighten the 2 retaining bolts (2) to the window assembly.

Tighten the bolts to 12 Nm (9 lb ft).

3. Install the window run channel bolt.

Tighten the bolts to 9 Nm (80 lb in).

4. Install the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.
6. Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement (Power Accessory Switch Panel Replacement).
7. Install the manual window handle, if equipped. Refer to Door Window Regulator Handle Replacement (Service and Repair).
8. Install the manual door lock lever.
9. Install the trim panel upper extension. Refer to Upper Extension Trim Panel Replacement (Upper Extension Trim Panel Replacement).
10. Inspect the operation of the window.