Front Door Window Glass: Service and Repair

Window Replacement - Front Door

Removal Procedure




1. Partially raise the window.
2. Remove the upper trim panel extension.
3. Remove the manual door-lock lever.
4. Remove the manual window handle, if equipped.
5. Remove the power accessory switch panel, if equipped.
6. Remove the door trim panel.
7. Remove the water deflector.
8. Remove the front bolt attachment from the window run channel.

Important: Do not remove the bolts.

9. Loosen the 2 retaining bolts (2) from the window assembly.
10. Remove the window glass (3) from the door by sliding the window glass out through the top.

Installation Procedure




1. Install the window glass (3) to the door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Tighten the 2 retaining bolts (2) to the window assembly.

Tighten the bolts to 12 N.m (9 lb ft).

3. Install the window run channel bolt.

Tighten the bolts to 9 N.m (80 lb in).

4. Install the water deflector.
5. Install the door trim panel.
6. Install the power accessory switch panel.
7. Install the manual window handle, if equipped.
8. Install the manual door-lock lever.
9. Install the upper trim panel extension.
10. Inspect the operation of the window.