Stabilitrak

Traction Control Switch Replacement (Stabilitrak)

Removal Procedure
1. Remove Instrument Panel (IP) bezel.





2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the instrument panel (IP) assembly (1).





3. Disconnect the harness connector from the stabilitrak switch.

Installation Procedure





1. Connect the harness connector to the stabilitrak switch.





2. Install the stabilitrak switch (3) into the Instrument Panel (IP) assembly (1)
3. Ensure that the switch is secure into both retaining tabs (2).
4. Install instrument panel (IP) bezel.