Non-Ratcheting Style

Vent Hose Connector Replacement - Front Drive Axle (Non-Ratcheting Style)

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the left tire and wheel assembly.
3. Disconnect the vent hose from the vent hose connector.
4. Remove the vent hose connector from the differential carrier assembly.

Installation Procedure





1. Install the vent hose connector into the differential carrier assembly.

Caution: Refer to Fastener Notice in Service Precautions.

2. Tighten the vent hose connector assembly.
^ Tighten the vent hose connector to 25 Nm (18 lb ft).
3. Connect the vent hose to the vent hose connector.
4. Install the left tire and wheel assembly.
5. Lower the vehicle.