Bracket Replacement
Bracket ReplacementRemoval Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the differential carrier assembly.
3. Remove the air conditioning compressor- (4.8 L, 5.3 L and 6.0 L engines.
4. Remove the nuts and the washers from the bracket.
5. Remove the bracket from the vehicle.
Installation Procedure
1. Install the bracket to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the washers and the nuts to the bracket.
^ Tighten the bracket to frame nuts to 90 Nm (67 lb ft).
3. Install the air conditioning compressor - 4.8 L, 5.3 L and 6.0 L engines.
4. Install the differential carrier assembly.
5. Lower the vehicle.