Front Floor Console Accessory Power Rear Receptacle Cover Replacement

Front Floor Console Accessory Power Rear Receptacle Cover Replacement

Removal Procedure

1. Remove the floor console bezel. Refer to Floor Console Bezel Replacement (Luxury) (Floor Console Bezel Replacement (Luxury)).
2. Remove the storage bin. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).
3. Remove the floor console end panel. Refer to Center Console End Panel Replacement (Center Console End Panel Replacement).

Important: Do not disconnect the electrical connectors.


4. Separate the end panel from the console in order to gain access to the retaining screws.




5. Remove the 2 screws (1) retaining the power outlet cover to the console end panel.
6. Remove the cover from the end panel.

Installation Procedure




1. Install the power outlet cover to the end panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 retaining screws (1).

Tighten the screws to 1.6 Nm (14 lb in).

3. Install the console end panel. Refer to Center Console End Panel Replacement (Center Console End Panel Replacement).
4. Install the storage bin. Refer to Front Floor Console Compartment Replacement (Non-Luxury) (Front Floor Console Compartment Replacement (Non-Luxury))Front Floor Console Compartment Replacement (Luxury) (Front Floor Console Compartment Replacement (Luxury))Front Floor Console Compartment Replacement (Pro) (Front Floor Console Compartment Replacement (Pro)).
5. Install the console bezel. Refer to Floor Console Bezel Replacement (Luxury) (Floor Console Bezel Replacement (Luxury)).