111. Valve Rocker Arm Cover Installation - Upper Right

Valve Rocker Arm Cover Installation -Upper Right





1. Apply a 2-3 mm wide by 0 5-1.5 mm high bead of P/N 97720043 sealant to the mating surface of the upper valve rocker arm cover.





2. Install the upper valve rocker arm cover.





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the upper valve rocker arm cover screws.
- Tighten the upper valve rocker arm cover screws in the proper sequence to 8 Nm (71 inch lbs.).