Procedures

AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Remove the air cleaner outlet duct.
2. Disconnect the mass airflow/intake air temperature (MAF/IAT) sensor electrical connector (4).




3. Grasp the air cleaner assembly and pull the retaining pins away from the retaining grommets.
4. Remove the air cleaner assembly.

INSTALLATION PROCEDURE




1. Align the retaining pins with the grommets in the adapter bracket.
2. Push down the air cleaner assembly until the air cleaner is seated fully.
3. Install the air cleaner outlet duct.




4. Connect the MAF/IAT sensor electrical connector (4).