Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Place a suitable container under the engine in order to drain the oil.
3. Remove the oil drain plug.
4. Drain the engine oil.





5. Disconnect the oil level sensor.
6. Remove the lower oil pan.





7. Remove the oil level sensor (1) and retaining clip (3).

Installation Procedure





1. Install the oil level sensor (1) and retaining clip (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil level sensor bolt (2).
- Tighten the engine oil level sensor bolts to 9 Nm (80 inch lbs.).
3. Install the lower oil pan.





4. Connect the oil level sensor.