Power Trunk / Liftgate Lock Actuator: Service and Repair

Lock Actuator Replacement - Rear Compartment Lid

Removal Procedure

Tools Required
1. Sp Tool J 34940




2. Remove the endgate cover.
3. Disconnect the electrical connectors, as needed.
4. Drill out the rivets that retain the endgate window release actuator to the endgate cover.
5. Remove the endgate window release actuator from the endgate cover.

Installation Procedure




1. Install the endgate window release actuator to the endgate cover.
2. Install the rivets that retain the endgate window release actuator to the endgate cover.
3. Connect the electrical connectors, as needed.
4. Install the endgate cover.