Seat Replacement - Rear (Crew Cab)

Seat Replacement - Rear (Crew Cab)

Removal Procedure




1. Remove the 2 bolts securing the rear seat bottom to the floor.
2. Carefully pull seat cushions ears to release retainers from the seat back mounting bracket.
3. Lift the rear seat bottom out of the vehicle.




4. Remove the 2 bolts securing the rear seat back to the floor.
5. Remove the 2 nuts and washers securing the rear seat back to the floor studs.
6. Remove the rear seat back from the vehicle.

Installation Procedure




1. Position the rear seat back in the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 2 bolts securing the rear seat back to the floor.

Tighten the rear seat back mounting bolts to 80 N.m (59 lb ft).

3. Install the 2 washers and nuts securing the rear seat back to the floor studs.

Tighten the rear seat back nuts to 80 N.m (59 lb ft).




4. Install the rear seat bottom to vehicle. Insure seat bottom frame is engaged with tabs in seat back mounting bracket.
5. Install the 2 bolts retaining the rear seat bottom to the floor.

Tighten the rear seat bottom bolts to 25 N.m (18 lb ft).

6. Install the seat bottom cushion ear retainers into the seat back mounting bracket.