Side Bearings Replacement

Differential Side Bearings Replacement

^ Tools Required
- J 22912-01 Split-Plate Bearing Puller
- J 25299 Side Bearing Installer
- J 8092 Driver Handle
- J 8107-2 Side Bearing Puller Pilot

Removal Procedure





1. Remove the differential from the rear axle housing.
2. Remove the differential side bearings by doing the following:
2.1. Install the J22912-01(2) onto the differential case.
2.2. Install the J 8107-2 (1) onto the differential case bearing.
2.3. Remove the differential side bearings using the J 22912-01 and a hydraulic press.

Installation Procedure





1. Install the differential side bearings by doing the following:
1.1. In order to protect the differential case, install the J 8107-2 (2) in the case on the side opposite the bearing installation.
1.2. Install the J 25299 (2) and the J 8092 (1) onto the differential case bearing as shown.
1.3. Drive the bearing onto the case using the J 25299 (2) and the J 8092 (1).
2. Install the differential.