Front Door Window Glass: Service and Repair

Window Replacement - Front Door

Removal Procedure

Caution: To prevent personal injury, gloves should be worn when removing broken glass.




1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the weatherstrip.
4. Remove the window run channels.
5. Lower the window about one half of the way down.
In this position, the window regulator rollers will be accessible through the openings in the door panel.
6. Remove the window from the regulator.

1. Move the window forward in order to release the sash channel (1) from the rear regulator roller.
2. Carefully tilt the window forward to a vertical position.
3. Pull the window upward in order to release the sash channel from the front regulator roller (2).

7. Remove the window from the door.

Installation Procedure




1. Move the regulator to the half-way down position in order to locate the front roller.
2. Install the window to the door.
3. Insert the window sash (1) to the front regulator roller (2).
4. Carefully tilt the window forward to a vertical position.
5. Move the window forward in order to install the sash channel (1) to the rear regulator roller.
6. Insert the rear regulator roller in the sash channel.
7. Lift the window lightly by hand in order to inspect the alignment of the window.
The window should feel stationary.
8. Install the door window run channels.
9. Install the window weatherstrip.
10. Install the water deflector.
11. Install the door trim panel.