Close From Open Position

To close the power sunroof from the open position is the same as to opening to the vent position. Turn the ignition ON, with the engine OFF. Press and hold the forward portion of the sunroof switch. This will apply the sunroof switch low reference to the sunroof switch close signal circuit, 5 volt reference, input to drop to 0 volts. As long as the sunroof module sees a constant input request of 0 volts at the sunroof switch close signal circuit input, the sunroof glass will continue to the closed position. The sunroof glass will soft stop at the closed position based on the inputs from the sunroof limit switches. The sunshade will have to be manually slide closed.