Turn Signals: Service and Repair
FRONT FOG LAMP - PARK/TURN SIGNAL ASSEMBLY REPLACEMENTREMOVAL PROCEDURE
1. Ensure that the front foglamp switch is in the OFF position.
2. Ensure that the ignition switch is in the LOCK position.
3. Remove the headlamp.
4. Remove the grille.
IMPORTANT: Squeeze together the retainer at the back of the turn signal lamp assembly in order to release the assembly from the grille.
5. Remove the turn signal lamp assembly with the front foglamp from the grille.
6. Remove the front foglamp adjustment screw.
7. Remove the front foglamp from the turn signal lamp assembly.
8. Remove the bulb from the front foglamp base.
INSTALLATION PROCEDURE
1. Install the bulb to the front foglamp base.
2. Install the front foglamp to the turn signal lamp assembly.
3. Install the front foglamp adjustment screw.
4. Install the turn signal lamp assembly with the front foglamp to the grille.
5. Install the grille.
7. Adjust the front foglamp. Refer to Fog Lamp Aiming Procedure.