Tilt Spring

Tilt Spring Replacement - Steering Column

Removal Procedure

Caution: Refer to Tilt Spring Caution in Service Precautions.

1. Use the tilt lever to tilt the column to the UP position.
2. Remove the steering column trim covers.





3. Remove the tilt spring (1) in the following manner:
3.1. Pry the tilt spring up until a bulge occurs and most of the tilt spring tension is removed.
3.2. Secure the tilt spring with locking pliers and continue prying until the tilt spring disengages from the post of the steering column support assembly (3).





4. Remove the spring guide (1) from the tilt spring (2).

Installation Procedure





1. Lubricate the tilt spring (2) with synthetic grease.
2. Install the spring guide (1) into the tilt spring (2).





3. Install the tilt spring (1).
3.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
3.2. Secure the tilt spring (1) with locking pliers.
4. Install the steering column trim covers.